The Effect of Non-Thermal Plasma on the Structural and Functional Characteristics of Human Spermatozoa

Significant antibacterial properties of non-thermal plasma (NTP) have converted this technology into a promising alternative to the widespread use of antibiotics in assisted reproduction. As substantial data available on the specific in vitro effects of NTP on male reproductive cells are currently missing, this study was designed to investigate selected quality parameters of human spermatozoa (n = 51) exposed to diffuse coplanar surface barrier discharge NTP for 0 s, 15 s, 30 s, 60 s and 90 s. Sperm motility characteristics, membrane integrity, mitochondrial activity, production of reactive oxygen species (ROS), DNA fragmentation and lipid peroxidation (LPO) were investigated immediately following exposure to NTP and 2 h post-NTP treatment. Exposure to NTP with a power input of 40 W for 15 s or 30 s was found to have no negative effects on the sperm structure or function. However, a prolonged NTP treatment impaired all the sperm quality markers in a time- and dose-dependent manner. The most likely mechanism of action of high NTP doses may be connected to ROS overproduction, leading to plasma membrane destabilization, LPO, mitochondrial failure and a subsequent loss of motility as well as DNA integrity. As such, our findings indicate that appropriate plasma exposure conditions need to be carefully selected in order to preserve the sperm vitality, should NTP be used in the practical management of bacteriospermia in the future.     

ZK60镁合金表面滚压强化试验研究

试验研究了ZK60镁合金表面滚压加工中工艺参数对试件表面粗糙度、表面形貌、表面残余应力和表层显微硬度的影响,结果表明滚压力和重复滚压次数对试件的表面粗糙度、表面形貌以及表面残余应力和表层硬度影响程度较大,滚压速度影响较小。对精车ZK60镁合金试件进行滚压加工,试件表面粗糙度R a、R z最大减小了50.3%和48.1%;残余压应力最大可达-54.55 MPa;显微硬度从试件表层到内部基体材料逐渐降低,表层硬度值最大为92.83 HV 0.25,比基体材料硬度提高了15.32%。     

ZL109铝合金车削表面完整性实验研究

设计了三因素四水平正交车削实验,综合运用极差分析、方差分析等方法,研究了切削参数对硅铝合金ZL109车削表面完整性的影响规律,得到了切削参数对于表面粗糙度、残余应力和显微硬度的影响程度和趋势,分析了ZL109车削表面完整性的形成机理,以期为切削参数优选提供实验和理论基础。研究结果表明,进给量f对表面粗糙度具有显著影响,切削速度v和进给量f增加会导致表面残余拉应力增大,显微硬度受切削参数的影响较小。     

基于哈希链的软件定义网络路径安全

针对软件定义网络中，控制器无法保证下发的网络策略能够在转发设备上得到正确执行的安全问题，提出一种新的转发路径监控安全方案。首先以控制器的全局视图能力为基础，设计了基于OpenFlow协议的路径凭据交互处理机制；然后采用哈希链和消息验证码作为生成和处理转发路径凭据信息的关键技术；最后在此基础上，对Ryu控制器和Open vSwitch开源交换机进行深度优化，添加相应处理流程，建立轻量级的路径安全机制。测试结果表明，该机制能够有效保证数据转发路径安全，吞吐量消耗比SDN数据层可信转发方案（SDNsec）降低20%以上，更适用于路径复杂的网络环境，但时延和CPU使用率的浮动超过15%，有待进一步优化。     

一款紧凑增强型可变阻抗电磁带隙结构

基于传统AI-EBG结构,提出了一种小尺寸的增强型电磁带隙结构,实现了从0.5~9.4 GHz的宽频带-40 dB噪声抑制深度,且下截止频率减少到数百MHz,可有效抑制多层PCB板间地弹噪声。文中同时研究了EBG结构在高速电路应用时的信号完整性问题,使用差分信号方案可改善信号完整性。     

Influences of chip serration on micro-topography of machined surface in high-speed cutting

Saw-tooth chip changes from macroscopically continuous ribbon to separated segments with the increase of cutting speed. The aim of this study is to find the correlations between chip morphology and machined surface micro-topography at different chip serration stages encountered in high speed cutting. High strength alloy steel AerMet100 was employed in orthogonal cutting experiments to obtain chips at different serration stages and corresponding machined surfaces. The chips and machined surfaces obtained were then examined with optical microscope (OM), scanning electron microscope (SEM), and white light interferometer (WLI). The result shows that chip serration causes micro-waves on machined surface, which increases machined surface roughness. However, wave amplitudes (surface roughness) at different serration stages are different. The principal factor influencing wave amplitude is the thickness of the sawed segment (tooth) of saw-tooth chip. With cutting parameters in this study, surface roughness contributed by chip serration ranges from 0.39 μm to 1.85 μm. This may bring on serious problems in the case of trying to replace grinding with high-speed cutting in rough machining. Some suggestions have been proposed to control the chip serration-caused surface roughness in high-speed cutting based on the results of the current study.     

Structural integrity assessment of nuclear containment through fracture characterization

The paper deals with the study of structural response of partially cracked nuclear containment model structure in over pressurized condition with the simulated experiments conducted under severe accidents analysis program for Indian nuclear containment structures. In this research, the fracture characterization of concrete containment structure is also investigated through the over pressure experiments on the BARC Containment (BARCOM) test model structure, which represents 1:4 scale of the prototype 540 MWe Tarapur pre‐stressed nuclear containment structure. In addition to the surface‐type electrical resistance, strain gauges conventionally and commonly deployed for containment proof‐test and ultimate load capacity evaluation of containment models, embedded vibratory wire strain gauges (VWSGs), the digital image correlation (DIC) technique, and soap bubble tests are employed in this study. For fracture characterization, an optical crack profile (OCP) technique is developed through DIC full‐field experiment conducted at the identified critical locations with conventional strain gauges to evaluate the fracture energy and the characteristics of the fracture process zone of concrete containment model structure subjected to the over‐pressure condition for its performance assessment in the case of the beyond design basis accidents. The combination of conventional sensors and full‐field DIC deployed for the first time on the largest scale containment model along with the associated analysis is shown to be effective in fracture characterization and improved structural integrity assessment of the containment model.     

Evaluation of the electrical integrity of E-textiles subjected to environmental conditions

E-textiles contain electrically conductive elements and electronic devices that are integrated in textile substrate. Wearable e-textiles are expected to perform like textiles in terms of breathability, conformability, and comfort despite the presence of the electrically conductive elements and electronics. E-textiles are also expected to provide reliable data and signal processing like electronic devices while they are subjected to normal wear and tear under different environmental conditions. The goal of this research was to investigate the electrical integrity of e-textiles while they are subjected to environmental conditions. Different woven samples of electronic-improved outer tactical vest with two narrow conductive traces woven in the warp direction were subjected to range of temperatures and humidity, including extreme conditions. The effects of formation parameters (e-yarn type, number of e-yarns/trace, and weldability), temperature, and humidity on the integrity of the e-textiles were studied. It was found that resistance of networks was affected by changes in air temperature and humidity and the quality of the weld had the greatest impact on electrical integrity of the conductive network. This impact was pronounced in more extreme environmental conditions, which revealed that there was a strong interaction between the weldability, temperature, and humidity.     

低应变瞬态荷载作用下基桩动力响应解析解

目前广泛采用的基桩低应变检测问题的理论基础是基于平截面假定的一维应力波理论。而实际上,锤击产生的应力波是三维应力波,不仅沿桩身纵向传播,还沿径向传播,对于基桩低应变检测问题平截面假定实际上是不成立的。此时,一维纵波传播问题转换为应力波沿三维柱体传播问题。文章从基桩三维理论出发,忽略桩土径向位移,考虑桩体中应力波沿纵向和径向传播与桩土的相互作用,建立三维条件下桩土系统瞬态振动计算模型,推导得到低应变瞬态荷载作用下基桩三维动力响应的解析解,以期为基桩低应变检测提供新的理论指导。     

Glocal integrity in 420 stainless steel by asynchronous laser processing

Cold working individual layers during additive manufacturing (AM) by mechanical surface treatments, such as peening, effectively “prints” an aggregate surface integrity that is referred to as a glocal (i.e., local with global implications) integrity. Printing a complex, pre-designed glocal integrity throughout the build volume is a feasible approach to improve functional performance while mitigating distortion. However, coupling peening with AM introduces new manufacturing challenges, namely thermal cancellation, whereby heat relaxes favorable residual stresses and work hardening when printing on a peened layer. Thus, this work investigates glocal integrity formation from cyclically coupling LENS® with laser peening on 420 stainless steel.